[Mristudio-users] 16 direction Philips gradient tables

Thu Jan 8 10:41:33 EST 2009

Hi Seongjin,

Thank you so much for the help. It works.

Sumei

-----Original Message-----
From: mristudio-users-bounces at mristudio.org [mailto:mristudio-users-bounces at mristudio.org]On Behalf Of [Seongjin]
Sent: Wednesday, January 07, 2009 7:27 PM
To: DTI Studio, ROI Editor, Landmarker Questions/Support
Subject: Re: [Mristudio-users] 16 direction Philips gradient tables

Sumei,

The number starts from 0 and ends as 15. So the total number of gradients is 16.
I recommend you following link for the gradient table of Philips system.
http://godzilla.kennedykrieger.org/~jfarrell/OTHERphilips/GUI.html <http://godzilla.kennedykrieger.org/%7Ejfarrell/OTHERphilips/GUI.html> 

To use the JAVA applet, you should have a JAVA run time environment (JRE) installed on your computer.

Good luck.

SC 

On Wed, Jan 7, 2009 at 4:39 PM, Wang, Sumei < Sumei.Wang at uphs.upenn.edu> wrote:

Hi all,

Does anybody have 16 direction gradient table (medium) for Philips system? I searched the forum and just got 15 dir gradient table as follows.

Thanks for your help.

Sumei

-----Original Message-----
From: mristudio-users-bounces at mristudio.org [mailto: mristudio-users-bounces at mristudio.org]On Behalf Of susumu
Sent: Friday, July 25, 2008 7:13 AM
To: 'DTI Studio, ROI Editor, Landmarker Questions/Support'
Subject: Re: [Mristudio-users] Philips gradient tables

Seongjin,

In Philips, there are 3 types (low: 6, medium: 15, high: 32) x 2 (overplus on/off) = 6 gradient tables.

The "gradient overplus = on" always use at least two gradients to enhance b efficiency and therefore gaining several millisecond of echo time. In your example, the low and high is "overplus = off" and the medium is "overplus = on". You can see "1, 0, 0" in the first two but not in the medium. 

The medium with "overplus = off" should look like;

            0:   0,    0,    0

            1:   1,    0,    0

            2:   0,    1,    0

            3:   0,    0,    1

            4:   -0.0424,-0.1146,-0.9925  

            5:  0.1749,-0.2005,-0.9639

            6:  0.2323,-0.1626,-0.9590

            7:  0.3675,0.0261,-0.9296     

            8: 0.1902,0.3744,-0.9076

            9: -0.1168,0.8334,-0.5402           

            10: -0.2005,0.2527,-0.9466

            11: -0.4958,0.1345,-0.8580

            12: -0.0141,-0.6281,-0.7780

            13: -0.7445,-0.1477,-0.6511

            14: -0.7609,0.3204,-0.5643

            15: -0.1809,0.9247,-0.33510

            16: -0.6796,-0.4224,-0.5997

            17: 0.7771,0.4707,-0.4178

            18: 0.9242,-0.1036,-0.3677

            19: 0.4685,-0.7674,-0.4378

            20: 0.8817,-0.1893,-0.4322

            21: 0.6904,0.7062,-0.1569

            22: 0.2391,0.7571,-0.6080

            23: -0.0578,0.9837,0.1703

            24: -0.5368,0.8361,-0.1135

            25: -0.9918,-0.1207,-0.0423

            26: -0.9968,0.0709,-0.0379

            27: -0.8724,0.4781,-0.1014

            28: -0.2487,0.9335,0.2581

            29: 0.1183,0.9919,-0.0471

            30: 0.3376,0.8415,0.4218

            31: 0.5286,0.8409,0.1163

            32: 0.9969,0.0550,-0.0571

In general, I do not recommend to user "overplus = on", because tensor calculation get complicated when oblique planes are used. You have to recalculate the table based on the image angles.

Also, please note that the "0, 0, 0" could be the first or the last image depending on how you specify the output files.

Susumu

  _____  

From: mristudio-users-bounces at mristudio.org [mailto: mristudio-users-bounces at mristudio.org] On Behalf Of [Seongjin]
Sent: Wednesday, July 23, 2008 3:47 PM
To: DTI Studio, ROI Editor, Landmarker Questions/Support
Subject: [Mristudio-users] Philips gradient tables

Dear DTIstudio users,

I wonder if you have gradient tables for Philips Achieva system.

>From a source I have a gradient table for low resolution as follows:

0:1.0000, 0.0000, 0.0000
1:0.0000, 1.0000, 0.0000
2:0.0000, 0.0000, 1.0000
3:-0.7044, -0.0881, -0.7044
4:0.7044, 0.7044, 0.0881
5:0.0881, 0.7044, 0.7044
6:0.0000, 0.0000, 0.0000

For medium,

0: 0.7071 -0.7071 1.00
1: 0.7071 -0.7071 -1.00
2: 1.0000 1.0000 0.0000
3: 0.9999 -0.1561 0.9879
4: 0.9894 0.4091 0.9240
5: 0.4674 0.8874 0.9970
6: 0.3866 0.9297 0.9930
7: 0.7667 -0.9511 0.7124
8: 0.6945 0.9954 -0.7295
9: 0.3580 -0.9800 -0.9547
10: 1.0000 -0.9992 -0.0392
11: 0.9999 -0.3989 -0.9171
12: 0.9923 0.4082 -0.9213
13: 0.9989 0.9982 -0.0759
14: 0.2899 0.9919 -0.9655
15: 0.0000 0.0000 0.0000

For high,

 0: 1.000, 0.000, 0.000
 1: 0.000, 1.000, 0.000
 2: 0.000, 0.000, 1.000
 3: -0.042, -0.115, -0.993
 4: 0.175, -0.200, -0.964
 5: 0.232, -0.163, -0.959
 6: 0.368, 0.026, -0.930
 7: 0.190, 0.374, -0.908
 8: -0.117, 0.833, -0.540
 9: -0.200, 0.253, -0.947
 10: -0.496, 0.134, -0.858
 11: -0.014, -0.628, -0.778
 12: -0.744, -0.148, -0.651
 13: -0.761, 0.320, -0.564
 14: -0.181, 0.925, -0.335
 15: -0.680, -0.422, -0.600
 16: 0.777, 0.471, -0.418
 17: 0.924, -0.104, -0.368
 18: 0.468, -0.767, -0.438
 19: 0.882, -0.189, -0.432
 20: 0.690, 0.706, -0.157
 21: 0.239, 0.757, -0.608
 22: -0.058, 0.984, 0.170
 23: -0.537, 0.836, -0.113
 24: -0.992, -0.121, -0.042
 25: -0.997, 0.071, -0.038
 26: -0.872, 0.478, -0.101
 27: -0.249, 0.933, 0.258
 28: 0.118, 0.992, -0.047
 29: 0.338, 0.841, 0.422
 30: 0.529, 0.841, 0.116
 31: 0.997, 0.055, -0.057
 32: 0.000, 0.000, 0.000

I wonder if the tables above are correct or not. Is there anything incorrect or partially incomplete, please let me know.
Thanks in advance.

Sincerely,
Seongjin 

The information contained in this e-mail message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail, and delete the original message. 
_______________________________________________
Mristudio-users mailing list
Mristudio-users at mristudio.org
http://lists.mristudio.org/mailman/listinfo/mristudio-users

The information contained in this e-mail message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail, and delete the original message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.mristudio.org/pipermail/mristudio-users/attachments/20090108/813b8dae/attachment-0001.html 