[Mristudio-users] tractography problems
farshidfar at sums.ac.ir
farshidfar at sums.ac.ir
Tue May 1 17:33:05 EDT 2012
Thanks for your answer. my scanner is siemens 1.5 Tesla with 20 gradient
directions and I used predefined gradient table in DTI studio software.
> It seems that you have a problem with your gradient table.
> Which scanner and gradient table are you using?
>
> On Fri, Apr 20, 2012 at 4:19 PM, Jacquie Hodge <
> Jacquie.Hodge at albertahealthservices.ca> wrote:
>
>> Hello,
>>
>> I am having some difficulties and I'm not sure exactly what the problem
>> is. I have attached a screen shot to show the ROI and the resulting
>> fibers
>> for CST that I get. The problem is I know there should be a full CST
>> there.
>> I have gone through the original images too see if there are any
>> distorted
>> ones to remove and they all look pretty clean. Do you have any
>> suggestions
>> as to what might be happening and how I can fix this?
>>
>> Also, I have drawn another ROI further up the tract and there are fibers
>> there (this is not shown on the picture I am sending you).
>>
>> ANy help or suggestions is much appreciated as I do not want to lose
>> this
>> patient because of the scan!
>>
>> Thank you so much!
>>
>> Jacquie
>>
>> Jacquie Hodge MSc candidate in Neuroscience, BSc
>> Neuroscience, University of Calgary
>> Research Assistant, Calgary Pediatric Stroke Program
>> Alberta Children's Hospital
>> 2888 Shaganappi Trail NW, Calgary, AB, Canada T3B 6A8
>> Phone: 403-955-7733 Fax: 403-955-2922
>> jacquie.hodge at albertahealthservices.ca
>> Program website: www.perinatalstroke.com
>> ________________________________________
>> From: mristudio-users-bounces at mristudio.org [
>> mristudio-users-bounces at mristudio.org] On Behalf Of Xin Li
>> [xli16 at jhmi.edu
>> ]
>> Sent: September 28, 2011 11:26 AM
>> To: DTI Studio, ROI Editor, DiffeoMap Questions/Support
>> Subject: Re: [Mristudio-users] Issues with Running DTI studio x64
>>
>> You are welcome.
>>
>> The manuals and videos are at https://www.mristudio.org/wiki/user_manual
>>
>>
>> Xin
>>
>> ----- Original Message -----
>> From: uday bhaskar <udayanbhaskar at gmail.com>
>> Date: Wednesday, September 28, 2011 12:57 pm
>> Subject: Re: [Mristudio-users] Issues with Running DTI studio x64
>> To: "DTI Studio, ROI Editor, DiffeoMap Questions/Support" <
>> mristudio-users at mristudio.org>
>>
>>
>> > Thank you.
>> >
>> > Do you suggest some online tutorials for beginners.
>> >
>> > --
>> > Thanks,
>> > Uday.
>> >
>> > On Wed, Sep 28, 2011 at 12:51 PM, Xin Li <xli16 at jhmi.edu> wrote:
>> >
>> > > Hello,
>> > >
>> > > It seems that you need to run vcredist_x64.exe on your computer
>> > first. The
>> > > exe file is available at
>> > >
>> > > DtiStudio is a Microsoft Visual Studio applications. The Microsoft
>> > Visual
>> > > Studio Redistribution package(vcredist_x64.exe) needs to be
>> > installed on
>> > > your machine.
>> > >
>> > >
>> > > Xin
>> > >
>> > >
>> > > ----- Original Message -----
>> > > From: uday bhaskar <udayanbhaskar at gmail.com>
>> > > Date: Wednesday, September 28, 2011 12:45 pm
>> > > Subject: [Mristudio-users] Issues with Running DTI studio x64
>> > > To: mristudio-users at mristudio.org
>> > >
>> > >
>> > > > Hi,
>> > > >
>> > > > I am a beginner and a new user of DTI studio. I am having a
>> > problem
>> > > > running the DTIstudio-latest-x64. When I try to run it gives me
>> > an error
>> > > > saying "The application failed to start because its
>> > > > side-by-side configuration is incorrect".
>> > > >
>> > > > Please let me know how to overcome this. Any help is
>> appreciated.
>> > > >
>> > > > --
>> > > > Thanks,
>> > > > Uday.
>> > > > _______________________________________________
>> > > > mristudio-users mailing list
>> > > > mristudio-users at mristudio.org
>> > > >
>> > > > Unsubscribe, send a blank email to:
>> > > mristudio-users-unsubscribe at mristudio.org
>> > > _______________________________________________
>> > > mristudio-users mailing list
>> > > mristudio-users at mristudio.org
>> > >
>> > > Unsubscribe, send a blank email to:
>> > > mristudio-users-unsubscribe at mristudio.org
>> > >
>> > _______________________________________________
>> > mristudio-users mailing list
>> > mristudio-users at mristudio.org
>> >
>> > Unsubscribe, send a blank email to:
>> mristudio-users-unsubscribe at mristudio.org
>> _______________________________________________
>> mristudio-users mailing list
>> mristudio-users at mristudio.org
>> http://lists.mristudio.org/mailman/listinfo/
>> Unsubscribe, send a blank email to:
>> mristudio-users-unsubscribe at mristudio.org
>>
>> This message and any attached documents are only for the use of the
>> intended recipient(s), are confidential and may contain privileged
>> information. Any unauthorized review, use, retransmission, or other
>> disclosure is strictly prohibited. If you have received this message in
>> error, please notify the sender immediately, and then delete the
>> original
>> message. Thank you.
>>
>> _______________________________________________
>> mristudio-users mailing list
>> mristudio-users at mristudio.org
>> http://lists.mristudio.org/mailman/listinfo/
>> Unsubscribe, send a blank email to:
>> mristudio-users-unsubscribe at mristudio.org
>>
>>
> _______________________________________________
> mristudio-users mailing list
> mristudio-users at mristudio.org
> http://lists.mristudio.org/mailman/listinfo/
> Unsubscribe, send a blank email to:
> mristudio-users-unsubscribe at mristudio.org
>
-----------------------------------------
This email was sent using SquirrelMail.
"Webmail for nuts!"
http://squirrelmail.org/
More information about the mristudio-users
mailing list