[Mristudio-users] Saving of ROIs in DTI studio

[Seongjin]

It might be better to use ROIeditor for ROI work.
You can use ROIs (saved using ROIeditor) in DTI Studio but you might be able
to see them. However it works exactly what you intended.

-SC

On Wed, Feb 9, 2011 at 1:30 PM, Petya R <petya_dti at yahoo.com> wrote:

> Hello,
>
> We are trying to save ROIs that we generate in DTI Studio (through the
> "Fiber" tab), and later be able to view the ROIs.  We have two
> non-overlapping ROIs: for the first ROI we select the "or" button (under
> "ROI-Operation"); and for the second ROI, we select the "and" button.  (Btw,
> after the second ROI is drawn, it disappears from the 2D view on which it is
> drawn).  So this method shows the fibers that go through both ROIs.
>
> However, we're not able to save these two ROIs, and view them later.  At
> best, we could save the first ROI, immediately after drawing it.  If we use
> the "save" button (under "ROI-Operation") after drawing the second ROI, and
> try to load up the ROI file in DTI Studio or ROI editor, we either see only
> the first ROI, or get the error message "There is no ROI data.", depending
> on the file format...
>
> Please let me/us know if you have any suggestions, as to how to save both
> ROIs and be able to view/load them later.
>
> Thank you very much for your help!
> Petya
>
>
>
> _______________________________________________
> mristudio-users mailing list
> mristudio-users at mristudio.org
> http://lists.mristudio.org/mailman/listinfo/
> Unsubscribe, send a blank email to:
> mristudio-users-unsubscribe at mristudio.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.mristudio.org/pipermail/mristudio-users/attachments/20110209/ef55b54a/attachment.html